How To Install A Soundproof Drywall

Most people are quite unsure of how to create a little more peace and quiet within their homes. When you install a drywall, it further prevents sound from entering your home.

Lack of peace is a growing problem for a lot of people. Fortunately, however, you don’t have to suffer from this problem once you know how to install a soundproof drywall

That’s what you’ll learn about in this article.

Are you furnishing your brand-new house? Then, you can add soundproof over the top just like a regular drywall. The thickness of the brand you will choose depends on the extent of the soundproofing you will need.

This thickness can either be 3/4″, 5/8″ or 1/2″.

Once you’ve made your decision on the brand, here’s a simple 4-step checklist of how you can go about this:

Step 1: Get the room ready

Remove any hindrance and clean off the walls. Then, measure the room. This will help you to determine the amount of insulating material that you will need.

If you want to be safe, make sure that you move away from any form of electric cord.

Step 2: Install the insulated sheets

Place your boards against the empty wall and ensure that the edges adapt to each very closely. Push them in close contact with each other and use a screw to put them in the proper place; make sure the screw on top does not screw into the one beneath.

Keep doing this throughout the room till you get to the point where there is a need for you to cut. When you get to that point, use a measuring tape to determine the width. Then, mark the point where you have to cut the board; use a flat boundary for this purpose.

Use the right knife to mark that point, then, break it into two with sudden force; keep the other half to be used at another time. Complete the installation of the boards throughout the room. You can fasten the tops such that it makes a slight depression on the surface.

Step 3: How to tape and the relevance of mud

When you want to tape. measure the tape such that it covers the whole distance you need. Then, make the tape fused together with the joints by applying a small mixture of mud.

If you want to make the whole wall very smooth, tape the sections where two of such sections meet. Then, add a smooth mixture of mud all around the strips using the putty knife. Make it as smooth as possible.

If you want to sand it, set it up overnight.

Step 4: Apply the finishing

You need to use sand to join the segmented parts, make sure they are flat and polished before you apply the finishing. To prevent you from going too deep, apply the sands lightly.

Once you’ve applied your topcoat, allow it to sit all-night so it will become free of any wetness.

By making use of an insulated putty, add a small sealing material on the doors, along with the boundaries of the upper and lower sections of the walls, its sides, as well as any place where you can find any boundary. The type of finishing you will need to apply will determine whether you are going to use mud to cover all parts of the wall or make use of an overlay.

A typical overlay is an orange peel. Not only is this an easy choice, an orange peel gives the wall an additional quality feel and it is easy to be sprayed. Using a smoothing tool to make everything smooth. Then, start painting.

If your drywall is already in existence, here is a 3-step checklist you can take to soundproof your drywall without starting from scratch:

Step 1:

Hang an extra layer of drywall. However, you can only make use of this option provided you can afford an extra space within the room.

This extra layer of drywall will leave space between the two layers. Hence, the soundproofing will be increased.

Step 2:

Since sound travels through walls by vibration, you can add more insulation to the wall to prevent vibration from occurring.

One simple and effective way of adding insulation is through the attic within the stud of the walls.

Step 3:

Install a soundproofing foam. This will reduce the amount of sound passing through the wall.

The soundproofing foam can be installed in two different but effective ways;

  • Take out the existing wall and install the foam in the stud of the wall. Then, re-install the existing drywall.
  • Attach the soundproofing foam to the existing drywall. Then, install a new layer.

You just discovered How to install a soundproof drywall either newly or to an existing drywall.

However, a word of warning – just knowing how to install a soundproof drywall isn’t going to install it.

That’s because the key is that you need to take action on what you just learned. And that’s I encourage you to review the steps, and then start implementing them right away.

Because the sooner you do, the sooner you’ll start enjoying a quiet home that is free from outside noise!

Image source:

publicdomainpictures.net

flickr.com

Leave a Reply

Your email address will not be published. Required fields are marked (required)